Casket Hardware
End Cap, 1-1/4 inch Oval
Add a finished look to your wooden handles. These end caps fit onto the ends of a 1 inch by 1-1/4 inch oval wooden handle. Order 8 tips to cover the ends of four handles on one casket. Antique finishes include; antique copper, antique bronze and venetian bronze. Polished finishes include; polished silver, polished gold and polished bronze. Matching swing bar handles also available. Specifications Size: 1-1/4 Inch, Oval Length: 2 Inches Long Material: Injection Molded Plastic Finishing process: PVD Vacuum Coating Finishing technique: Antiqued and Polished
$4.88
End Cap, 1-1/2 inch Round
Add a finished look to your wooden handles. These end caps fit onto the ends of a 1-1/2 inch round wooden dowel handle. Order 8 tips to cover the ends of four handles on one casket. Antique finishes include; antique bronze, antique copper and venetian bronze. Polished finishes include; polished silver, polished gold and polished bronze. Matching swing bar handles also available. Specifications Size: 1-1/2 Inch, Round Length: 2-1/4 Inches long Material: Injection Molded Plastic Finishing process: PVD Vacuum Coating Finishing technique: Antiqued and Polished
$5.15 - $5.19
Bolt-Thru Swing Bar Casket Handles, 1-1/2 inch Round
These are the industry standard when it comes to swing bar style casket handle hardware. For four generations, Dixline has been stamping and finishing this swing bar handle bracket for casket builders all over the world. This is the design that has been copied by dozens of foreign casket hardware manufacturers. If you want the original, look no further. Antiqued finishes include; antique bronze, antique copper and venetian bronze. Polished finishes include; polished silver, polished gold and polished bronze. Add matching end caps to complete your project. Swing bar arms are designed to wrap around a 1-1/2 inch round wooden casket dowel (not included). As recent as 2015, one could typically find this standard size dowel at a local home improvement store; this seems no longer to be the case. Rockler, Woodcraft, Lowes all have limited selection online of 1-1/2 round, but only in lengths up to 36 and 48 inches. There is a wood shop in Maine that sells a 72" Ash dowel online. Order 12 swing bars for 4-pattern on each long side, or 16 swing bars for 6-pattern on each long side. These hinged swing bar arms bolt through the sidewall of the casket. The bolt is secured with a # 10 flat washer and a #10 machine screw nut (not included, order separately). Specifications Material: Steel Finishing process: Electroplating Finishing technique: Antiqued and Polished 4-1/2 Inches Long 1-3/4 Inches Wide
$5.39
End Cap, Tip, 1x1-1/4 Oval
The finishing touch for your Swing Bar Handles. *****THIS END CAP DOES NOT FIT OUR WOODEN DOWEL HANDLES***** This dowel end cap is for covering the open ends of wood dowel or steel tube swing bar style casket handles. The tip secures in place on the end of the handle with two screws or two rivets. This end cap for swing bar casket handles is the real vintage. We've partnered with General Machinery & Mfg. Co. of Chicago to revive these unique vintage parts--some of which have not been produced since the 1950s. Learn more about these vintage parts by reading about our suppliers. The first thing you will notice when you receive these parts is that the steel is higher quality and heavier gage than many similar brackets made by others. This tip is compatible with 1x1-1/4 oval steel tubing. If you are planning to use our wooden dowel handles, use the 1x1-3/8 tip instead. Tip is available in plain steel and in a variety of powder coated finish colors. If you have a particular color request, let us know and we can quote you. Plain steel tip are ready for finishing. Specifications Tip Height: 2 in.Tip Length: 1-1/2 in.Tip Width: 1-5/8 in.Handle Size: 1x1-1/4 OvalSteel: 0.050 inches (1/20 inch) - 18 ga.Steel Source: Made in USA, AlwaysFinish: Unfinished or Powder Coated Finishing These parts are ready for your unique and creative finishing coat. While we offer swing arm parts in a small variety of polished and antique finishes, there are countless methods to finish these steel parts to achieve the unique style you want. Learn more by reading our article on how to finish raw steel.
$1.98 - $3.86
Casket Handles, Swing Bar Arm with Adapter, Bar Style, Raw Steel
This swing bar arm and adapter is the real vintage. We've partnered with General Machinery & Mfg. Co. of Chicago to revive these unique vintage parts--some of which have not been produced since the 1940s. Learn more about these vintage parts by reading about our suppliers. The first thing you will notice when you receive these parts is that the steel is higher quality and heavier gage than many similar brackets made by others. Specifications Arm Length: 3-3/4 in. Arm Width: 1-1/8 in. Arm Protrusion (at rest): 1-1/8 in. Handle Size: 5/8 x 1-1/4 in. with 1/4 in. radius Steel (arms): 0.025 (1/40 inch) - 24 ga. Steel (adapters): 0.050 inches (1/20 inch) - 18 ga. Steel Source: Made in USA, Always Finish: Unfinished Part No: G307 Finishing These parts are ready for your unique and creative finishing coat. While we offer swing arm parts in a small variety of polished and antique finishes, there are countless methods to finish these steel parts to achieve the unique style you want. Learn more by reading our article on how to finish raw steel.
$2.66
Lug, The Last Supper
The Last Supper lug is a decorative lug compatible with bolt-through style swing bar casket handle brackets. This part is stamped in steel, electroplated and buffed in antique bronze finish in Galva, IL. Use 8 lugs with 16 bolt-through swing bar handles for one casket. Alternatively, use one decorative lug with two wooden lugs on each long side. Specifications Length: 11-1/2 in. Width: 4-1/2 in. Thickness: 7/8 in. Handle Spacing: 7-1/2 in. Material: Steel Finish: Antique Bronze
$20.50
Casket Handles, Art Deco Lug with Single Swing Bar Arm, Bar Handle
Vintage Art Deco Lug This art deco lug with one swing arm is the real vintage. We've partnered with General Machinery & Mfg. Co. of Chicago to revive these unique vintage parts--some of which have not been produced since the 1940s. Learn more about these vintage parts by reading about our suppliers. The first thing you will notice when you receive these parts is that the steel is higher quality and heavier than many similar brackets made by others. Specifications Lug Height: 6 in. Lug Width: 2-1/2 in. Arm Length: 3-3/4 in. Arm Width: 1-1/8 in. Arm Protrusion (at rest): 1-1/2 in. Handle Size: 5/8 x 1-1/4 in. bar with 1/4 in. radius Steel (arms): 0.025 (1/40 inch) - 24 ga. Steel (adapters): 0.050 inches (1/20 inch) - 18 ga. Steel Source: Made in USA, Always Finish: Unfinished Finishing These parts are ready for your unique and creative finishing coat. While we offer swing arm parts in a small variety of polished and antique finishes, there are countless methods to finish these steel parts to achieve the unique style you want. Learn more by reading our article on how to finish raw steel.
$6.43
Casket Handles, Swing Bar, End Cap, Tip, 5/8 X 1-1/4 Triple Grove Oval
This decorative end cap for swing bar casket handles is the real vintage. This tip fits a 5/8 by 1-1/4 Triple Groove Oval bar style handle. Specifications Tip Height: 3/4 Inch Tip Length: 2 1/2 Inch Tip Width: 2 1/4 Inch Handle Size: 5/8 x 1-1/4 Inch oval Steel: 0.050 Inches (1/20 inch) - 18 ga. Steel Source: Made in USA, Always Finish: Unfinished Part No: G-264 Finishing These parts are ready for your unique and creative finishing coat. While we offer swing arm parts in a small variety of polished and antique finishes, there are countless methods to finish these steel parts to achieve the unique style you want. Learn more by reading our article on how to finish raw steel. History We've partnered with General Machinery & Mfg. Co. of Chicago to revive these unique vintage parts--some of which have not been produced since the 1950s. Learn more about these vintage parts by reading about our suppliers. The first thing you will notice when you receive these parts is that the steel is higher quality and heavier gage than many similar brackets made by others.
$4.00