Casket Hardware

Use these wheel bolts to make solid wood casket handles. The bolt twists tight in the wooden handle and will not turn when you secure the handle with a nut and washer. Cover the head of the bolt with a wooden plug. Historically this style of bolt was used to secure an iron tire to a wooden carriage wheel. Available in two sizes 1/4-20 by 3 inches in length 5/16-18 by 4 inches in length

Read more less

The finishing touch for your Swing Bar Handles. *****THIS END CAP DOES NOT FIT OUR WOODEN DOWEL HANDLES***** This dowel end cap is for covering the open ends of wood dowel or steel tube swing bar style casket handles. The tip secures in place on the end of the handle with two screws or two rivets. This end cap for swing bar casket handles is the real vintage. We've partnered with General Machinery & Mfg. Co. of Chicago to revive these unique vintage parts--some of which have not been produced since the 1950s. Learn more about these vintage parts by reading about our suppliers. The first thing you will notice when you receive these parts is that the steel is higher quality and heavier gage than many similar brackets made by others. This tip is compatible with 1x1-1/4 oval steel tubing.  If you are planning to use our wooden dowel handles, use the 1x1-3/8 tip instead. Tip is available in plain steel and in a variety of powder coated finish colors. If you have a particular color request, let us know and we can quote you. Plain steel tip are ready for finishing. Specifications Tip Height: 2 in.Tip Length: 1-1/2 in.Tip Width: 1-5/8 in.Handle Size: 1x1-1/4 OvalSteel: 0.050 inches (1/20 inch) - 18 ga.Steel Source: Made in USA, AlwaysFinish: Unfinished or Powder Coated Finishing These parts are ready for your unique and creative finishing coat. While we offer swing arm parts in a small variety of polished and antique finishes, there are countless methods to finish these steel parts to achieve the unique style you want. Learn more by reading our article on how to finish raw steel.

Read more less

Heavy Duty Bail Pull, Casket Handle This decorative casket handle is inspired by the traditional elegance of the Victorian era furniture hardware. The handle features a fluted silhouette with smooth curves and flared ends. With an array of popular colors to choose from, it is easy to match your design. This handle has four holes that fit #6 wood screws.  For heavier casket applications, we recommend fitting the handle to your casket with a pair of #6 wood screws in the top set of holes and drill holes through the casket wall and secure with #6 machine screws with a nut and flat washer on the inside of your casket for added strength. SPECIFICATIONS Part: PP7426 Handle Width: 11-1/2 in. Handle Height: 2 in. Depth: 2-3/8 in. Weight: 5 oz. Finish: Metalized Plastic Origin: Brazil

Read more less

Swing Bar Bracket Cover (Lug) for Casket Handles This lug (also known as a shield) is designed to cover the mounting points on the outside of the casket where the bolt-through style swing bar arm connects to the casket. Each lug covers two swing bar arms. The lug can be installed with two wood screws. Typically, the lug snaps in place after the swing bar arms are installed with brass clips (2 clips are included with each lug). Typically use 3 lugs per long side and 1 lug on each end of the casket for a total of 8 lugs for one casket. This lug is compatible with bolt through swing bar handle brackets. Specifications Length: 11-1/2 in. Width: 3 in. Thickness: 3/4 in. Handle Spacing: 7-1/2 in. Material: Injection Molded Plastic; Brass Spring Clips Finishing Process: PVD Vacuum Coating Finishing Technique: Antiqued or Polished Color: Antique Bronze, Polished Gold or Polished Bronze Origin: Made in Illinois, USA

Read more less

These hinged casket handle brackets screw to the outside sidewall of the casket. Order a set of 12 brackets for 4-pattern on each long side, or 16 brackets for 6-pattern on each long side. These brackets are designed to secure to an 5/8-inch by 1-1/4-inch bar style wooden casket handle. Notice, these brackets will not fit Casket Builder Supply oval wooden dowel handles. These parts are stamped from steel in Chicago, Illinois and powder coated in Beaver Dam, Wisconsin. Specifications Parts: G240 + G307 Arm Length: 4 in. Arm Width: 1-1/8 in. Arm Protrusion (at rest): 1-1/8 in. Handle Size: Bar 5/8x1-1/4 with 1/4 radius Steel (arms): 0.025 (1/40 inch) - 24 ga. Steel (adapters): 0.050 inches (1/20 inch) - 18 ga. Steel Source: Made in USA, Always Finish: Powder coat Color: Oil Rubbed Bronze

Read more less

The Last Supper lug is a decorative lug compatible with bolt-through style swing bar casket handle brackets. This part is stamped in steel, electroplated and buffed in antique bronze finish in Galva, IL. Use 8 lugs with 16 bolt-through swing bar handles for one casket. Alternatively, use one decorative lug with two wooden lugs on each long side. Specifications Length: 11-1/2 in. Width: 4-1/2 in. Thickness: 7/8 in. Handle Spacing: 7-1/2 in. Material: Steel Finish: Antique Bronze

Read more less

This decorative casket handle is composed of a Crown Royale lug is with two swing arms, bar and tips. Also known as a steel extension handle or an EAR. Placement variations include:- One long bar set on each long side with a short bar set on each end- Three short bar sets on each long side and a short bar set on each end  Specifications Short Bar Width: 14-1/2 in. Long Bar Width: 64-1/2 in. Height: 5-1/2 inHeight: 5-1/2 in.Steel: 0.050 inches (1/20 inch) - 18 ga.Finish: UnfinishedSterling Part No: E703Lug: G147Arms: G307Bar: TM54Tips: G264 Finishing These parts are ready for your unique and creative finishing coat. While we offer swing arm parts in a small variety of polished and antique finishes, there are countless methods to finish these steel parts to achieve the unique style you want. Learn more by reading our article on how to finish raw steel.  History We've partnered with General Machinery & Mfg. Co. of Chicago to revive these unique vintage parts--some of which have not been produced since the 1940s. Learn more about these vintage parts by reading about our suppliers. This particular configuration was made from steel stamped in Chicago and then plated or painted by Sterling Casket Hardware in Virginia. The first thing you will notice when you receive these parts is that the steel is higher quality and heavier gage than many similar brackets made by others.

Read more less

Vintage Art Deco Lug This art deco lug with one swing arm is the real vintage. We've partnered with General Machinery & Mfg. Co. of Chicago to revive these unique vintage parts--some of which have not been produced since the 1940s. Learn more about these vintage parts by reading about our suppliers. The first thing you will notice when you receive these parts is that the steel is higher quality and heavier than many similar brackets made by others. Specifications Lug Height: 6 in. Lug Width: 2-1/2 in. Arm Length: 3-3/4 in. Arm Width: 1-1/8 in. Arm Protrusion (at rest): 1-1/2 in. Handle Size: 5/8 x 1-1/4 in. bar with 1/4 in. radius Steel (arms): 0.025 (1/40 inch) - 24 ga. Steel (adapters): 0.050 inches (1/20 inch) - 18 ga. Steel Source: Made in USA, Always Finish: Unfinished Finishing These parts are ready for your unique and creative finishing coat. While we offer swing arm parts in a small variety of polished and antique finishes, there are countless methods to finish these steel parts to achieve the unique style you want. Learn more by reading our article on how to finish raw steel.   

Read more less

This steel arm and adapter style casket handle is common on wood caskets. This type of arm hinges on a patented 3-hole pattern and can be connected to a simple single adapter or a pair of arms can be used with a lug. The arm is secured to the outside of a wood casket with single or double lug or bracket. The arm is wrapped around an oval dowel handle made from wood or steel. This arm is available in two sizes including a 1x1-1/4 oval and a 1x1-3/8 oval. Both are compatible with our wooden oval dowel handles, with the smaller of the two making for a a very tight fit with our oval wooden dowels. The 1x1-3/8 arm and adapter is a little easier to fit with our oval dowels. If you are making your own oval dowel handles with a 1-inch bullnose bit, then order the 1x1-1/4 size.  If you are fitting with our oval steel bar stock, use the 1x1-1/4 size. This swing bar is the real vintage. We've partnered with General Machinery & Mfg. Co. of Chicago to revive these unique vintage parts--some of which have not been produced since the 1940s. Learn more about these vintage parts by reading about our suppliers. The first thing you will notice when you receive these parts is that the steel is higher quality and heavier gage than many similar brackets made by others. This type of arm is an adapter design. The bracket is secured to the side of the casket with single or double lug or bracket. The arm hinges on a patented 3-hole pattern. This arm is compatible with our wooden oval dowel handles. Specifications Part: G265Arm Length: 4 in.Arm Width: 1-1/4 in.Arm Protrusion (at rest): 1-1/4 in.Handle Size: Oval 1x1-3/8Steel (arms): 0.025 (1/40 inch) - 24 ga.Steel Source: Made in USAFinish: Unfinished Finishing These parts are ready for your unique and creative finishing coat. While we offer swing arm parts in a small variety of polished and antique finishes, there are countless methods to finish these steel parts to achieve the unique style you want. Learn more by reading our article on how to finish raw steel. 

Read more less

This adapter is the basic method of attaching a swingbar casket arm to the outside wall of the casket. The 3-hole pattern dates back to a 1920s patent held by GMMCO in Chicago in the 1920s and has been copied by every other casket hardware handle manufacturer on the planet. This part is stamped in Chicago from US steel on the same equipment, and under the same family management, today as it was in the 1920s. This adapter is compatible with any size or style of swing arm we offer. This adapter is an American original.  SpecificationsHeight:Width:Material: SteelFinish: None (raw steel)

Read more less

The finishing touch for your Swing Bar handles. This dowel end cap is for covering the open ends of wood dowel or steel tube swing bar style casket handles. The tip secures in place on the end of the handle with two screws or two rivets.  This end cap for swing bar casket handles is the real vintage. We've partnered with General Machinery & Mfg. Co. of Chicago to revive these unique vintage parts--some of which have not been produced since the 1950s. Learn more about these vintage parts by reading about our suppliers. The first thing you will notice when you receive these parts is that the steel is higher quality and heavier gage than many similar brackets made by others. This tip is compatible with our oval wooden dowels. Tip is available in plain steel and in a variety of powder coated finish colors. If you have a particular color request, let us know and we can quote you. Plain steel tips are ready for finishing. Specifications Part No: G400 Tip Height: 2 in. Tip Length: 1-1/2 in. Tip Width: 1-5/8 in. Handle Size: 1 x 1-3/8 in. oval with 1/2 in. radius Steel: 0.050 inches (1/20 inch) - 18 ga. Steel Source: Made in USA, Always Finish: Unfinished or Powder Coat Finishing These parts are ready for your unique and creative finishing coat. While we offer swing arm parts in a small variety of polished and antique finishes, there are countless methods to finish these steel parts to achieve the unique style you want. Learn more by reading our article on how to finish raw steel.

Read more less

This decorative end cap for swing bar casket handles is the real vintage. This tip fits a 5/8 by 1-1/4 Triple Groove Oval bar style handle. Specifications Tip Height: 3/4 Inch Tip Length: 2 1/2 Inch Tip Width: 2 1/4 Inch Handle Size: 5/8 x 1-1/4 Inch oval Steel: 0.050 Inches (1/20 inch) - 18 ga. Steel Source: Made in USA, Always Finish: Unfinished Part No: G-264 Finishing These parts are ready for your unique and creative finishing coat. While we offer swing arm parts in a small variety of polished and antique finishes, there are countless methods to finish these steel parts to achieve the unique style you want. Learn more by reading our article on how to finish raw steel. History We've partnered with General Machinery & Mfg. Co. of Chicago to revive these unique vintage parts--some of which have not been produced since the 1950s. Learn more about these vintage parts by reading about our suppliers. The first thing you will notice when you receive these parts is that the steel is higher quality and heavier gage than many similar brackets made by others.

Read more less