Same day shipping on orders received by 11:00am Central Time.

Fasteners & Joinery

19 products


  • Last stock! Coffin Nails, Historic Square Nails, 1-1/2 in., 1 lb. bag Coffin Nails, Historic Square Nails, 1-1/2 in., 1 lb. bag

    Coffin Nails, Historic Square Nails, 1-1/2 in., 1 lb. bag

    12 reviews

    3 in stock

    Rooted in an age-old tradition. These period coffin nails are cut much the same way they were 150 years ago. These solid-steel nails have outstanding durability and holding power. Sometimes the finest detail can affect the aesthetic of the project as a whole. These square-head nails will add that detail to your casket or coffin. Approximately 125 nails per 1 lb. bag. Square cut nails are very durable and have been used for over 200 years. They are hard to pull out because their shape causes the wood fibers to push downward and wedge against the nails.

    3 in stock

    $17.25

  • 1X Miller Dowels, Wooden Dowels 1X Miller Dowels, Wooden Dowels

    1X Miller Dowels, Wooden Dowels

    2 reviews

    170 in stock

    Miller Dowel has reintroduced peg construction with distinct advantages over standard dowel construction. Stepped design forms a tight joint all the way through Far superior holding power than straight dowels Minimal tools required Use to reinforce many types of wood joints Easy and fast to install from the outside of the project Miller dowels are simple products that can add beauty and longevity to any project. We offer 4 hardwood species, in 3 sizes, and the drill bits you'll need to properly use your new joining components. Whether professional or hobbyist, we promise you will love Miller Dowels. Specifications (1X) For joining wood up to 1-1/8 inches thick Dowel Length: 2-3/4 in. Cap Diameter: 7/16 in. Click here to learn more about the use of Miller Dowels. Voted one of the hot new tools from the 2002 Show Circuit by Wood Magazine!

    170 in stock

    $9.99 - $38.99

  • Last stock! Miller Dowel Joinery Starter Kit

    Miller Dowel Joinery Starter Kit

    1 reviews

    9 in stock

    Miller Dowel has reintroduced peg construction with distinct advantages over standard dowel construction. Stepped design forms a tight joint all the way through Far superior holding power than straight dowels Minimal tools required Use to reinforce many types of wood joints Easy and fast to install from the outside of the project Miller dowels are simple products that can add beauty and longevity to any project. We offer 4 hardwood species, in 3 sizes, and the drill bits you'll need to properly use your new joining components. Whether professional or hobbyist, we promise you will love Miller Dowels. Starter kits include a drill bit and 40 birch dowels. Specifications (mini X) For joining wood up to 3/4 inches thick Dowel Length: 1-5/8 in. Cap Diameter: 1/4 in. Specifications (1X) For joining wood up to 1-1/8 inches thick Dowel Length: 2-3/4 in. Cap Diameter: 7/16 in. Specifications (2X) For joining wood up to 1-5/8 inches thick Dowel Length: 3-1/2 in. Cap Diameter: 1/2 in. Click here to learn more about the use of Miller Dowels. Voted one of the hot new tools from the 2002 Show Circuit by Wood Magazine!

    9 in stock

    $32.99 - $47.99

  • Wheel Bolts, Handle Bolts, Concealed Bolt Head, Tire Bolt Wheel Bolts, Handle Bolts, Concealed Bolt Head, Tire Bolt

    Wheel Bolts, Handle Bolts, Concealed Bolt Head, Tire Bolt

    2 reviews

    475 in stock

    Use these wheel bolts to make solid wood casket handles. The bolt twists tight in the wooden handle and will not turn when you secure the handle with a nut and washer. Cover the head of the bolt with a wooden plug. Historically this style of bolt was used to secure an iron tire to a wooden carriage wheel. Available in two sizes 1/4-20 by 3 inches in length 5/16-18 by 4 inches in length

    475 in stock

    $0.24 - $68.97

  • Last stock! Mini X Miller Dowels, Wooden Dowels, 100 Pack Mini X Miller Dowels, Wooden Dowels, 100 Pack

    Mini X Miller Dowels, Wooden Dowels, 100 Pack

    3 reviews

    8 in stock

    Miller Dowel has reintroduced peg construction with distinct advantages over standard dowel construction. Stepped design forms a tight joint all the way through Far superior holding power than straight dowels Minimal tools required Use to reinforce many types of wood joints Easy and fast to install from the outside of the project Miller dowels are simple products that can add beauty and longevity to any project. We offer 4 hardwood species, in 3 sizes, and the drill bits you'll need to properly use your new joining components. Whether professional or hobbyist, we promise you will love Miller Dowels. Specifications (mini X) For joining wood up to 3/4 inches thick Dowel Length: 1-5/8 in. Cap Diameter: 1/4 in. Click here to learn more about the use of Miller Dowels. Voted one of the hot new tools from the 2002 Show Circuit by Wood Magazine!

    8 in stock

    $17.99 - $31.99

  • Wood Screw, #8 x 5/8

    Wood Screw, #8 x 5/8

    1 reviews

    Ideal for securing adapter style swing bar handles to caskets Each swing bar casket handle has three holes to facilitate attaching it to the casket wall. We recommend using one Machine Screw, #10-24 x 1-1/4 in. (secured with a washer and nut) in the center hole and two of these wood screws on the outside holes to secure the swing bar handle on the casket wall. Screw colors available match the finishes available on our swing bar casket handles. Available in the following quantities: 1 LB (approx. 280 pieces) Available in the following colors/finishes: Unplated Steel (matches Ant. Copper, Ant. Bronze, Oil-rubbed Bronze) Black Phosphate (matches Venetian Bronze, Handforged Black, Gloss Black, and River Black Satin) Yellow Zinc (matches Polished Gold) Zinc Plated (matches Polished Silver) Specifications: Fastener Type: Wood Screw Size Description: #8 x 5/8 in. Diameter Nominal Size: #8 Length: 5/8 in. Material: Steel Finish: Assorted Head Type: Round Washer Head Drive Type: Phillips/Square Combo Head Size: #2 Origin: Imported

    $12.95 - $19.95

  • Miller Dowel TruFit Drill Bit Miller Dowel TruFit Drill Bit

    Miller Dowel TruFit Drill Bit

    1 reviews

    21 in stock

    Use this specialized stepped tru-fit drill bit to drill holes for Miller Dowels. This drill bit is made in the USA from quality tool steel. Available in three sizes for matching Miller Dowels in 1X, 2X, and Mini X. Precision stepped drill bit for Miller Dowels Bores clean holes Prevents boards from separating as you drill This drill bit will last a long time. Each bit can be professionally sharpened once, but then it should be replaced in order to maintain the precision profile of the dowels. I've been using Miller Dowels for the last 5 years and never had to sharpen a bit. I've drilled 1000s of holes in soft and hardwoods including oak, ash, and walnut with ease. They only time I need to replace a bit is when I ruin a bit by hitting on a nail or screw. Dowel Specifications (1X)Length: 2-3/4 inchCap Diameter: 7/16 inchMaterial: For joining material up to 1-1/8 in. thick Dowel Specifications (2X)Length: 3-1/2 inchCap Diameter: 1/2 inchMaterial: For joining material up to 1-5/8 in. thick Dowel Specifications (Mini X)Length: 1-5/8 inchCap Diameter: 1/4 inchMaterial: For joining material 1/2 in. to 3/4 in. thick

    21 in stock

    $20.99 - $35.99

  • Machine Screw Nut, #10-24 x 3/8 in. x 1/8 in., Coarse Thread, Hex

    Machine Screw Nut, #10-24 x 3/8 in. x 1/8 in., Coarse Thread, Hex

    32 in stock

    This nut is used in conjunction with a machine screw and washer to secure swing bar arms to the casket wall. Nuts are almost always used in conjunction with a mating bolt to fasten multiple parts together, kept together by a combination of their threads' friction, a slight stretching of the bolt, and compression of the parts to be held together. Available in the following quantities: 1 LB (Approximately 300 pieces) 5 LB (Approximately 1500 pieces) Specifications: Fastener Type:  Hex Machine Screw Nut Size Description:  #10-24 x 3/8 in. x 1/8 in. Diameter/Nominal Size:  #10 Thickness:  0.117-0.130 in. Wrench Size/Across Flats:  0.362-0.375 in. Width Across Corners:  0.413-0.433 in. Thread Pitch:  24 Thread Pitch Type:  Coarse Thread Direction:  Right Grade:  2 Material:  Low Carbon Steel Finish:  Plain Finish/No Plating Drive Type:  External Hex Used With:  Bolts/Screws up to Grade 5

    32 in stock

    $5.49 - $25.95

  • Last stock! Machine Screw, #10-24 x 1-1/4 in., Coarse Thread, Phillips Pan Head, Black Oxide

    Machine Screw, #10-24 x 1-1/4 in., Coarse Thread, Phillips Pan Head, Black Oxide

    7 in stock

    This machine screw is used for attaching adaptor style swing bar arms to the casket wall. Suggested use is 1 or 2 per swing bar arm (each arm adaptor has 3 holes). Some builders use 1 Machine Screw in the middle hole combined with wood screws in the 2 outside holes. Machine screws have a uniform diameter the entire length of the shaft as opposed to tapered screws which have a pointed tip. Available in the following quantities: 1 LB (Approximately 113 pieces) 5 LB (Approximately 565 pieces) Specifications: Fastener Type:  Machine Screw Phillips Pan Head Size:  #10-24 x 1-1/4 in. Diameter/Nominal Size:  #10 Length:  1-1/4 in. Wrench Size/Across Flats:  PH#2 Head Diameter:  0.373-0.357 in. Head Height:  0.122-0.133 in. Thread Pitch:  24 Thread Pitch Type:  Coarse Thread Direction:  Right Thread Coverage:  Full Material:  Low Carbon Steel Finish:  Black Oxide  

    7 in stock

    $19.99 - $99.99

  • 2X Miller Dowels, Wooden Dowels 2X Miller Dowels, Wooden Dowels

    2X Miller Dowels, Wooden Dowels

    1 reviews

    77 in stock

    Miller Dowel has reintroduced peg construction with distinct advantages over standard dowel construction. Stepped design forms a tight joint all the way through Far superior holding power than straight dowels Minimal tools required Use to reinforce many types of wood joints Easy and fast to install from the outside of the project Miller dowels are simple products that can add beauty and longevity to any project. We offer 4 hardwood species, in 3 sizes, and the drill bits you'll need to properly use your new joining components. Whether professional or hobbyist, we promise you will love Miller Dowels. Specifications (2X) For joining wood up to 1-5/8 inches thick Dowel Length: 3-1/2 in. Cap Diameter: 1/2 in. Click here to learn more about Miller Dowels Voted one of the hot new tools from the 2002 Show Circuit by Wood Magazine!

    77 in stock

    $12.99 - $48.99

  • Washer, Flat, #10

    Washer, Flat, #10

    78 in stock

    This washer is used in conjunction with a machine screw and nut to secure swing bar arms to the casket wall. Washers are thin disk-shaped plates with a hole that is used to distribute the load of a threaded fastener such as a bolt or nut. Available in the following quantities: 1 LB (Approximately 425 pieces) 5 LB (Approximately 2125 pieces) Specifications: Fastener Type:  Glat Washer, SAE Pattern Size Description:  #10 Diameter/Nominal Size:  #10 (Washer sizing: Washer sizes are nominal-sized for the bolt that the washer will fit. Actual inside diameter is almost always larger than stated size.) Inside Diameter:  0.220 in. Outside Diameter:  0.500 in. Thickness:  0.036-0.065 in. Grade:  2 Material:  Low Carbon Steel Finish:  Plain Finish/No Plating Used with:  Bolts/Screws up to Grade 5

    78 in stock

    $4.99 - $24.95

  • Iron Braces and Brackets Iron Braces and Brackets

    Iron Braces and Brackets

    1599 in stock

    These internal braces add structural support and strengthen wood joints. Help resist the natural forces in wood that cause cracks, splits, and open miter joints. These economical plain steel braces are ideal for reinforcing casket floor joinery, corner joinery, and lid construction. Specially designed in 90-degree L shape or 180-degree straps. Easily shape them to various other angles for inside casket lid support. These braces accelerate build time and help reassure integrity of your finished casket while in storage through the challenges of seasonal changes in temperature and humidity. Specifications Material: Plain Steel Thickness: 0.035 in. Width: 1/2 in. Length: 1.25 in. (each side) Angle: 90 or 180 degrees

    1599 in stock

    $0.34 - $0.59

Fasteners & Joinery

Login

Forgot your password?

Don't have an account yet?
Create account