Casket Hardware

Bail Style Casket Handles This heavy duty bail pull style handle has a little bit of hinge swing to it and adorns a decorative style that dates back to the mid 1800s. These hinged casket bail handles are secured with four #8 wood screws to the outside sidewall of the casket. These parts are high quality durable plastic in a metalized finish. If you'd like a color that is not shown, email or call for a quote. SPECIFICATIONS Part: PC6853 Handle Width: 8-1/4 in. Handle Height: 3-1/2 in. Depth: 1-7/8 in. Weight: 6 oz. Finish: Metalized Plastic Origin: Brazil

Read more less

This decorative steel bar stock fits a 5/8 by 1-1/4 oval bar style swing arm bracket. It is available in standard 72 inch lengths to accommodate either a single handle on the long side of a casket or a several short handles for the sides or end of a casket. Use short bars to construct 3 separate handles for a casket (a.k.a. an EAR).  Specifications Profile Size: 5/8 x 1-1/4 in. Oval Length: 72 in. Steel: 0.050 inches (1/20 inch) - 18 ga. Steel Source: Made in USA, Always Finish: Unfinished Part No: TM54 Finishing These parts are ready for your unique and creative finishing coat. While we offer swing arm parts in a small variety of polished and antique finishes, there are countless methods to finish these steel parts to achieve the unique style you want. Learn more by reading our article on how to finish raw steel. History We've partnered with General Machinery & Mfg. Co. of Chicago to revive these unique vintage parts--some of which have not been produced since the 1950s. Learn more about these vintage parts by reading about our suppliers. The first thing you will notice when you receive these parts is that the steel is higher quality and heavier gage than many similar brackets made by others.

Read more less

This steel arm and adapter style casket handle is common on wood caskets. This type of arm hinges on a patented 3-hole pattern and can be connected to a simple single adapter or a pair of arms can be used with a lug. The arm is secured to the outside of a wood casket with single or double lug or bracket. The arm is wrapped around an oval dowel handle made from wood or steel. This arm is available in two sizes including a 1x1-1/4 oval and a 1x1-3/8 oval. Both are compatible with our wooden oval dowel handles, with the smaller of the two making for a a very tight fit with our oval wooden dowels. The 1x1-3/8 arm and adapter is a little easier to fit with our oval dowels. If you are making your own oval dowel handles with a 1-inch bullnose bit, then order the 1x1-1/4 size.  If you are fitting with our oval steel bar stock, use the 1x1-1/4 size. This swing bar is the real vintage. We've partnered with General Machinery & Mfg. Co. of Chicago to revive these unique vintage parts--some of which have not been produced since the 1940s. Learn more about these vintage parts by reading about our suppliers. The first thing you will notice when you receive these parts is that the steel is higher quality and heavier gage than many similar brackets made by others. This type of arm is an adapter design. The bracket is secured to the side of the casket with single or double lug or bracket. The arm hinges on a patented 3-hole pattern. Specifications Part: G270Arm Length: 4 in.Arm Width: 1-1/4 in.Arm Protrusion (at rest): 1-1/4 in.Handle Size: Oval 1x1-1/4Steel (arms): 0.025 (1/40 inch) - 24 ga.Steel Source: Made in USAFinish: Unfinished Finishing These parts are ready for your unique and creative finishing coat. While we offer swing arm parts in a small variety of polished and antique finishes, there are countless methods to finish these steel parts to achieve the unique style you want. Learn more by reading our article on how to finish raw steel. 

Read more less

Decorative metal casket handle adapters were common on American caskets built in the 1920s through the 1950s. Consolidation, off-shore production, and cost-cutting measures from the 1960s to present day have resulted in the loss of many of these decorative metal corners. We ventured to northwest neighborhoods of Old Chicago just off West Fullerton Avenue--an historical area home to dozens of legacy machine shops, as well as furniture and clothing manufacturers. We found the original location where these parts were stamped from American steel on equipment that has been operating since the 1920s. This casket adapter is the real deal. An American original. True vintage not stamped since 1948. This adapter is compatible with any adapter style swing arm. Designed to fasten to the outside wall of the casket with two wood screws. SpecificationsHeight: 6 in.Width: 2-1/8 in.Material: SteelFinish: None (raw steel)

Read more less

This decorative steel bar stock fits a 1 by 1-1/4 oval bar style swing arm bracket. It is available in standard 72 inch lengths to accommodate either a single handle on the long side of a casket or cut into short handles for the end of a casket. Short bars can also be used to construct 3 separate handles for a casket (a.k.a. an EAR).  Specifications Profile Size: 1 x 1-1/4 in. Oval Length: 72 in. Steel: 0.050 inches (1/20 inch) - 18 ga. Steel Source: Made in USA, Always Finish: Unfinished Part No: TM28 Finishing These parts are ready for your unique and creative finishing coat. While we offer bar stock parts in a small variety of polished and antique finishes, there are countless methods to finish these steel parts to achieve the unique style you want. Learn more by reading our article on how to finish raw steel. History We've partnered with General Machinery & Mfg. Co. of Chicago to revive these unique vintage parts--some of which have not been produced since the 1950s. Learn more about these vintage parts by reading about our suppliers. The first thing you will notice when you receive these parts is that the steel is higher quality and heavier gage than many similar brackets made by others.

Read more less

This swing bar is the real vintage. We've partnered with General Machinery & Mfg. Co. of Chicago to revive these unique vintage parts--some of which have not been produced since the 1940s. Learn more about these vintage parts by reading about our suppliers. The first thing you will notice when you receive these parts is that the steel is higher quality and heavier gage than many similar brackets made by others. This type of arm is an adapter design. The bracket is secured to the side of the casket with single or double lug or bracket. The arm hinges on a patented 3-hole pattern. Specifications Part No: G307 Arm Length: 3-3/4 in. Arm Width: 1 in. Arm Protrusion (at rest): 1-1/4 in. Handle Size: Bar 5/8x1-1/4 with 1/4 radius Steel (arms): 0.025 (1/40 inch) - 24 ga. Steel Source: Made in USA, Always Finish: Unfinished Finishing These parts are ready for your unique and creative finishing coat. While we offer swing arm parts in a small variety of polished and antique finishes, there are countless methods to finish these steel parts to achieve the unique style you want. Learn more by reading our article on how to finish raw steel. 

Read more less