Same day shipping on orders received by 11:00am Central Time.

Casket Hardware

52 products


  • Casket Handles, Wooden, Oval 1x1-1/4 Casket Handles, Wooden, Oval 1x1-1/4

    Casket Handles, Wooden, Oval 1x1-1/4

    24 reviews

    592 in stock

    Bar Style Wooden Oval Handles These wooden handles are moulded to the precise oval shape (1.00 in. x 1.25 in.) to fit in the swing bar style hinged handle hardware common on many caskets. This dowel bar can also be used to fit handmade wood brackets with wheel bolts for a stationary handle set. Sold in three lengths to accommodate most swing bar handle configurations. Use two long and two medium handles for one complete casket. A typical casket handle on the long side is 63-68 inches in length. A typical short handle ranges from 10 to 16 inches. For individual "EAR" style handles, the length is 9-11 inches. Dowels are available in pine, oak, and walnut. Specifications Oval: 1 inch by 1-1/4 inches Long Handles: 72 inches Short Handles: 24 inches Compatibility These wooden dowels are compatible with different sized parts from different manufacturers.  Order carefully--and if you have questions let us know. Made by Dixline - All swing bar style arms & tips in 1-1/4 oval sizes Bolt-Thru Swing Bar Casket Handles, 1-1/4 Inch, Oval (electroplated) Adapter Style Swing Bar Casket Handle, 1-1/4 Inch Oval (electroplated) End Cap, 1-1/4 inch Oval (electroplated) Made by GMMCO  - All swing bar style arms & tips in 1-3/8 oval sizes Bolt-Thru Swing Bar Casket Handles, 1x1-3/8 Oval (powdercoat) (plain steel) Swing Bar Casket Handle, Arm and Adapter, 1-3/8 Oval (powdercoat) End Cap, Tip, 1x1-3/8 Oval (powdercoat) (plain steel)  Swing Bar Casket Handles, 1 x 1-3/8 Oval, Arm Only (plain steel) Art Deco Adapter Style Swing Bar Casket Handle 1-3/8 Oval (powdercoat)  

    592 in stock

    $8.49 - $39.99

  • Casket Latch, Casket Lid Closure Casket Latch, Casket Lid Closure

    Casket Latch, Casket Lid Closure

    15 reviews

    2377 in stock

    These industry standard casket latches are quality stamped steel. Latches come in two styles; for the Stud Style, a stud or pin, is mounted on the edge of the casket lid.  For the Tab Style, a plate with a tab is mounted on the edge of the casket lid. Additionally, both styles are offered in either left or right opening configurations. For left hand style, the lever clasp points to the left and pivots on the right. For the right hand style, the clasp points to the right and pivots on the left. Many casket builders use the left hand style exclusively on both sides of all caskets. Available in both left hand and right hand kits (sold by each) that include screws. The four pieces for the assembly are packaged separately. Latches are also available in bulk packs of 100. Bulk packs DO NOT include #6 screws. Casket Latch (Stud Style) Universal Kit Contents Bottom Mounting Plate (1)  - aka Spacer Plate Lever (1) Top Mounting Plate (1) Stud (1) Casket Latch (Tab Style) Universal Kit Contents Bottom Mounting Plate (1) - aka Spacer Plate Lever (1) Top Mounting Plate (1) Tab Plate (1) Specifications Width: 2 inches Back: 3/4 inch (measured from front wall of casket to back of mortise) Depth: 3/16 inch Radius: 1/4 inch (use 1/2 inch router bit) Material: Stamped steel Color: Black Origin: Made in the USA Mortise Instructions (Stud Style) Use a 1/2 inch router bit. Setup your template or stops for a 2 inch width. To avoid tear-out, take off very very little (about 1/16) with your first pass working from left to right. Take only about 1/8 to 3/16 more material per pass and complete the mortise in 4-6 passes. If you are too aggressive--especially on the first pass--it may result in tear-out on the right edge of the mortise.

    2377 in stock

    $4.39

  • Universal Casket Hardware Kit Universal Casket Hardware Kit

    Universal Casket Hardware Kit

    21 reviews

    So You're Building a Casket? Here's all of the hardware you need for lid hinges, lid top support and latches. Contents include hardware for one complete casket with a single-piece or two-piece hinged lid. This casket hardware kit includes separable hinges for easy assembly and removal of the lids during finishing and upholstery and simple 4-piece latches (aka lid catches). Lid top supports keep the lid safely open in a 90-degree position. Casket Hardware Kit Contents Separable Hinge Escutcheon for edge mount (4 pieces) Separable Hinge Escutcheon for flat mount (4 pieces) Hinge Stud (8 pieces) #6 by 3/4 black screws for hinges (20 pieces) Top Support Bracket (2 pieces) Top Support Bracket w/screw - flat mount (4 pieces) Top Support Bracket - optional side mount (2 pieces) #6 by 3/4 zinc screws for lid supports (10 pieces) Right & Left Latch Mounting Plate (2 pieces) Right & Left Latch Lever (2 pieces) Right & Left Latch Cover (2 pieces) Latch Stud (2 pieces) #6 by 3/4 black screws for latch (4 pieces) This hardware kit includes enough parts for either style of hinge (flat mount or edge mount) and lid top support (flat mount or side mount) so you can make your mounting choice after you have the pieces in hand. Notice, you will have parts left over when you are done.

    $39.99

  • End Cap, 1-1/4 inch Oval End Cap, 1-1/4 inch Oval

    End Cap, 1-1/4 inch Oval

    11 reviews

    1484 in stock

    Add a finished look to your wooden handles. These end caps fit onto the ends of a 1 inch by 1-1/4 inch oval wooden handle. Order 8 tips to cover the ends of four handles on one casket. Antique finishes include; antique copper, antique bronze and venetian bronze. Polished finishes include; polished silver, polished gold and polished bronze. Matching swing bar handles also available. Specifications Size: 1-1/4 Inch, Oval Length: 2 Inches Long Material: Injection Molded Plastic Finishing process: PVD Vacuum Coating Finishing technique: Antiqued and Polished

    1484 in stock

    $4.88

  • Top Support Universal Kit Top Support Universal Kit

    Top Support Universal Kit

    13 reviews

    6044 in stock

    Secure the casket lid in the open position Top supports secure the casket lid in the open position and prevents the lid from opening too far. Use a pair of top supports for each casket--one top support at the head end, and one at the foot end on both full and half-couch models. A complete top support assembly includes one support arm and two mounting brackets--one bracket on each end of the arm. Mounts secure to the arm with a special screw that allows the arm to pivot on the bracket. The mounting brackets come in two styles: flush mount and side mount. We've put together a universal top support kit as a convenience to our customers. This kit will fit any casket lid design configuration you choose. Top Support Universal Kit Package Contents Top Support Arm (2) Side Mount Bracket (4) Flush Mount Bracket (2)  Bracket Pivot Screw (4) If ordering the individual parts, be sure to order two mounts for each arm. Installation Notes To mount the bracket, measure precisely 6 inches into the casket box from the hinge pivot point and 6 inches into the lid from the same hinge pivot point. The top support center pivot point (i.e. the knee) should fold toward you as you close the lid. Once closed, the folded top support should be roughly level with the inside top edge of the casket box. If the two pivot points are not in the same vertical line (with lid closed) then the knee joint of the top support will push up into your casket lid, or push down into the casket upholstery.  To adjust the casket lid open position to about 90 degrees, adjust the mounting point of the top support inside the casket box up or down the same vertical line about 6 inches from the casket lid hinge point. Specifications Length: 9 1/2 inches Offset: 3/16 inches Origin: Made in the USA

    6044 in stock

    $1.09 - $12.49

  • Adapter Style Swing Bar Casket Handle, 1-1/4 Inch Oval Adapter Style Swing Bar Casket Handle, 1-1/4 Inch Oval

    Adapter Style Swing Bar Casket Handle, 1-1/4 Inch Oval

    16 reviews

    1195 in stock

    The industry standard when it comes to swing bar style casket handles These are the industry standard when it comes to swing bar style casket handle hardware. For four generations, Dixline has been stamping and finishing this Swing bar arm for casket builders all over the world. This is the design that has been copied by dozens of foreign casket hardware manufacturers. If you want the original, look no further. Antique finishes include antique bronze, antique copper and venetian bronze. Polished finishes include polished bronze, polished silver and polished gold. Add matching end caps to complete your project. These swing bar arms are designed to secure to an 1-inch by 1-1/4-inch oval wooden casket handle (not included). Order a set of 12 swing bars for 4-pattern on each long side, or 16 swing bars for 6-pattern on each long side. Installation & Fasteners (not included) These hinged swing bar arms attach to the sidewall of the casket. Each swing bar arm has three holes. We recommend using the center hole for positioning with one machine screw, washer & nut through the casket wall. This allows you to precisely measure and pre-drill those holes and position the handle neatly. The other two holes can receive two #8 x 5/8 inch pan head wood screws to secure the handles to the casket wall. Fasteners sold separately. Machine screws: #10 x 24 Washer: #10 Nut: #10 x 24 Wood screws: #8 x 5/8 Specifications Material: Steel Finishing process: Electroplating Finishing technique: Antiqued and Polished 4-1/2 inches tall 1-5/8 inches wide Handle assembly adds 1-5/8 inches to outside of casket on each side Origin: Illinois, USA

    1195 in stock

    $7.50

  • Separable Hinges for Casket Lids Separable Hinges for Casket Lids

    Separable Hinges for Casket Lids

    19 reviews

    9216 in stock

    Casket Hinges, Separable Hinges for Lids Separable hinges are commonly used on caskets for easy removal of the casket lid during finishing and upholstery after woodworking is completed. At a minimum, use four hinges per casket for a standard half couch (two piece lid) or full couch (one piece lid). Some craftsmen use six hinges for added security and for hardwood caskets. Hinges sold by each and include black #6 by 3/4 inch screws. Hinges sold in bulk (pack of 100) DO NOT include screws.  Installation Tips for Casket Hinges... Edge vs. Flat Mount Styles There are two styles of hinge escutcheon or base:  edge mount style and flat mount style. An edge mount means the hinge escutcheon--the part that attaches to the casket box--is designed to fit over the edge of a standard 3/4-inch thick piece of board wood. If the top edge of your casket box wall is thicker, then you need the flat mount style of hinge. What's Included Hinge escutcheon/base (1) Hinge stud (1) Order 4-6 Hinges for EACH Casket Bulk Pack of 100 We offer wholesale pricing on bulk packs of 100 or more that include hinge base and stud. At 4 hinges per casket, this is enough hinges for 25 caskets. Screws not included in bulk packs.

    9216 in stock

    $2.79 - $2.99

  • Bolt-Thru Swing Bar Casket Handles, 1-1/4 Inch, Oval Bolt-Thru Swing Bar Casket Handles, 1-1/4 Inch, Oval

    Bolt-Thru Swing Bar Casket Handles, 1-1/4 Inch, Oval

    7 reviews

    3579 in stock

    Casket Handles, Swing Bar, Bolt Through, 1-1/4 inch Oval These are the industry standard when it comes to swing bar style casket handle hardware. For four generations, Dixline has been stamping and finishing this swing bar handle bracket for casket builders all over the world. This is the design that has been copied by dozens of foreign casket hardware manufacturers. If you want the original, look no further. Antique finishes include; antique bronzed, antique copper and venetian bronze. Polished finishes include; polished silver, polished gold and polished bronze. Add matching end caps to complete your project. These swing bar arms are designed to wrap around a 1 inch by 1-1/4 inch oval wooden handle (not included). Order 12 swing bars for 4-pattern on each long side, or 16 swing bars for 6-pattern on each long side. These hinged swing bar arms bolt through the side wall of the casket. The bolt is secured with a #10 flat washer and a #10 machine screw nut (purchased separately). Specifications Material: Steel Finishing process: Electroplating Finishing technique: Antiqued and Polished Arm Height: 4-1/2 in. Arm Width: 1-5/8 in. Depth/Projection: 1-5/8 in.

    3579 in stock

    $5.49

  • Sale -$26.99 Casket Adjustable Bed Casket Adjustable Bed

    Casket Adjustable Bed

    8 reviews

    212 in stock

    Steel spring bed frame and lift mechanisms for caskets This steel bed frame is the perfect foundation for the bedding of your casket. When installed with lift mechanisms, this bed frame can be raised and lowered to adjust the viewing position from either end of the casket. Lift mechanisms allow 11 inches of adjustment. Adjustments are made with a hex wrench (or crank).  Specifications Steel spring bed length: 73-1/4 inches Steel spring bed width: 18-1/4 inches Steel spring bed Thickness: 1 inch Lifting mechanism height: 14 inches Lifting mechanism width: 4 inches Lifting mechanism depth: 4 inches LIfting mechanism adjustment: 11 inches Material: Steel Origin: Made in USA Use a plywood or edge-glued panel as an alternative to the steel spring bed While the steel spring bed and lift mechanisms are sold as a set, you can also purchase them separately. As an alternative, some customers purchase only the lift mechanisms and make an edge-glued wood panel or plywood bed. Lift mechanisms include all hardware required for installation. Consider lining this steel bed frame with our Universal Casket Mattress and Pillow set designed to fit this bed perfectly.  

    212 in stock

    $39.00 - $139.00

  • Bail Handle, Coffin Handle, Casket Handle Bail Handle, Coffin Handle, Casket Handle

    Bail Handle, Coffin Handle, Casket Handle

    21 reviews

    1292 in stock

    Victorian Style Casket Handles This bail pull style casket handle dates back to the early 1920s. These hinged casket bail handles screw to the outside sidewall of the casket.  These parts are stamped from steel in Chicago, Illinois and powder coated in Beaver Dam, Wisconsin. If you'd like a color that is not shown, email or call for a quote. This bail style casket handle is the real vintage. We've partnered with General Machinery & Mfg. Co. of Chicago to revive these unique vintage parts--some of which have not been produced since the 1950s. Learn more about these vintage parts by reading about our suppliers. The first thing you'll notice when you receive these parts is that the steel is higher quality and heavier gage than many similar brackets made by others. SPECIFICATIONS Part: G102, G204 Handle Width: 5 in. Handle Height: 2-1/2 in. Steel: 0.050 inches (1/20 inch) - 18 ga. Steel Source: Made in USA, Always Finish: Unfinished or Powder Coated

    1292 in stock

    $6.63 - $10.63

  • End Cap, Tip, 1x1-3/8 Oval End Cap, Tip, 1x1-3/8 Oval

    End Cap, Tip, 1x1-3/8 Oval

    1 reviews

    1480 in stock

    The finishing touch for your Swing Bar handles. This dowel end cap is for covering the open ends of wood dowel or steel tube swing bar style casket handles. The tip secures in place on the end of the handle with two screws or two rivets. This end cap for swing bar casket handles is the real vintage. We've partnered with General Machinery & Mfg. Co. of Chicago to revive these unique vintage parts--some of which have not been produced since the 1950s. Learn more about these vintage parts by reading about our suppliers. The first thing you will notice when you receive these parts is that the steel is higher quality and heavier gage than many similar brackets made by others. This tip is compatible with our oval wooden dowels. Tip is available in plain steel and in a variety of powder coated finish colors. If you have a particular color request, let us know and we can quote you. Specifications Part No: G400 Tip Height: 2 in. Tip Length: 1-1/2 in. Tip Width: 1-5/8 in. Handle Size: 1 x 1-3/8 in. oval with 1/2 in. radius Steel: 0.050 inches (1/20 inch) - 18 ga. Steel Source: Made in USA, Always Finish: Unfinished or Powder Coat Finishing These parts are ready for your unique and creative finishing coat. While we offer swing arm parts in a small variety of polished and antique finishes, there are countless methods to finish these steel parts to achieve the unique style you want. Learn more by reading our article on how to finish raw steel.

    1480 in stock

    $1.99 - $9.40

  • Coffin Handle, Casket Handle, Solid Hardwood, Vintage Styling Coffin Handle, Casket Handle, Solid Hardwood, Vintage Styling

    Coffin Handle, Casket Handle, Solid Hardwood, Vintage Styling

    13 reviews

    262 in stock

    Good ol' fashioned hardwood handles. They just don't make 'em like this anymore. That's why we made them. Handcrafted from solid hardwood We use mostly Ash, but on occasion we might have a set of 8 made from oak, or butternut, but difficult for the untrained eye to discern the difference from Ash. While we designed them for an Old World style casket or coffin, these solid wood handles are large enough and suitable as door pulls on a barn door, garden gate, tool shed or garage door. The design is inspired by the bow tie shapes of door pulls and handles from the Old World. This very same type of handle may have appeared on a Carriage House door in 16th century England. In fact, the handle that inspired these was a turn-of-the-century solid oak door handle from a silo room door inside a dairy barn. The handle has a 3/8-inch threaded bolt inserted in its construction. The bolt has 2 inches protruding for fastening to a heavy door. Each handle includes a pair of matching nuts & washers. These handles can be left unfinished or can be finished with an oil or water based finish of your choice. Dimensions Width: 12 in. Height: 3-7/8 in. Projection: 2-1/2 in. Gap: 1-1/2 in. Thread length: 1-1/2 in. Weight: 14 oz. Material: Hardwood Ash, Oak, or Butternut Origin: Made in Wisconsin, USA

    262 in stock

    $19.95

Casket Hardware

Login

Forgot your password?

Don't have an account yet?
Create account