Same day shipping on orders received by 11:00am Central Time.

Casket Hardware

10 products


  • Bolt-Thru Swing Bar Casket Handles, 1-1/2 inch Round Bolt-Thru Swing Bar Casket Handles, 1-1/2 inch Round

    Bolt-Thru Swing Bar Casket Handles, 1-1/2 inch Round

    5 reviews

    1761 in stock

    These are the industry standard when it comes to swing bar style casket handle hardware. For four generations, Dixline has been stamping and finishing this swing bar handle bracket for casket builders all over the world. This is the design that has been copied by dozens of foreign casket hardware manufacturers. If you want the original, look no further. Antiqued finishes include; antique bronze, antique copper and venetian bronze. Polished finishes include; polished silver, polished gold and polished bronze. Add matching end caps to complete your project. Swing bar arms are designed to wrap around a 1-1/2 inch round wooden casket dowel (not included). As recent as 2015, one could typically find this standard size dowel at a local home improvement store; this seems no longer to be the case.  Rockler, Woodcraft, Lowes all have limited selection online of 1-1/2 round, but only in lengths up to 36 and 48 inches. There is a wood shop in Maine that sells a 72" Ash dowel online. Order 12 swing bars for 4-pattern on each long side, or 16 swing bars for 6-pattern on each long side.  These hinged swing bar arms bolt through the sidewall of the casket. The bolt is secured with a # 10 flat washer and a #10 machine screw nut (not included, order separately). Specifications Material: Steel Finishing process: Electroplating Finishing technique: Antiqued and Polished 4-1/2 Inches Long 1-3/4 Inches Wide

    1761 in stock

    $5.39

  • Lug, Swing Bar Bracket Cover Lug, Swing Bar Bracket Cover

    Lug, Swing Bar Bracket Cover

    109 in stock

    Swing Bar Bracket Cover (Lug) for Casket Handles This lug (also known as a shield) is designed to cover the mounting points on the outside of the casket where the bolt-through style swing bar arm connects to the casket. Each lug covers two swing bar arms. The lug can be installed with two wood screws. Typically, the lug snaps in place after the swing bar arms are installed with brass clips (2 clips are included with each lug). Typically use 3 lugs per long side and 1 lug on each end of the casket for a total of 8 lugs for one casket. This lug is compatible with bolt through swing bar handle brackets. Specifications Length: 11-1/2 in. Width: 3 in. Thickness: 3/4 in. Handle Spacing: 7-1/2 in. Material: Injection Molded Plastic; Brass Spring Clips Finishing Process: PVD Vacuum Coating Finishing Technique: Antiqued or Polished Color: Antique Bronze, Polished Gold or Polished Bronze Origin: Made in Illinois, USA

    109 in stock

    $9.95

  • Lug, The Last Supper Lug, The Last Supper

    Lug, The Last Supper

    105 in stock

    The Last Supper lug is a decorative lug compatible with bolt-through style swing bar casket handle brackets. This part is stamped in steel, electroplated and buffed in antique bronze finish in Galva, IL. Use 8 lugs with 16 bolt-through swing bar handles for one casket. Alternatively, use one decorative lug with two wooden lugs on each long side. Specifications Length: 11-1/2 in. Width: 4-1/2 in. Thickness: 7/8 in. Handle Spacing: 7-1/2 in. Material: Steel Finish: Antique Bronze

    105 in stock

    $20.50

  • Steel Extension Casket Handle, EAR, Crown Royale

    Steel Extension Casket Handle, EAR, Crown Royale

    Out of stock

    This decorative casket handle is composed of a Crown Royale lug is with two swing arms, bar and tips. Also known as a steel extension handle or an EAR. Placement variations include:- One long bar set on each long side with a short bar set on each end- Three short bar sets on each long side and a short bar set on each end  Specifications Short Bar Width: 14-1/2 in. Long Bar Width: 64-1/2 in. Height: 5-1/2 inHeight: 5-1/2 in.Steel: 0.050 inches (1/20 inch) - 18 ga.Finish: UnfinishedSterling Part No: E703Lug: G147Arms: G307Bar: TM54Tips: G264 Finishing These parts are ready for your unique and creative finishing coat. While we offer swing arm parts in a small variety of polished and antique finishes, there are countless methods to finish these steel parts to achieve the unique style you want. Learn more by reading our article on how to finish raw steel.  History We've partnered with General Machinery & Mfg. Co. of Chicago to revive these unique vintage parts--some of which have not been produced since the 1940s. Learn more about these vintage parts by reading about our suppliers. This particular configuration was made from steel stamped in Chicago and then plated or painted by Sterling Casket Hardware in Virginia. The first thing you will notice when you receive these parts is that the steel is higher quality and heavier gage than many similar brackets made by others.

    Out of stock

    $22.97 - $62.46

  • Lug, Single, Adapter

    Lug, Single, Adapter

    2433 in stock

    This adapter is the basic method of attaching a swingbar casket arm to the outside wall of the casket. The 3-hole pattern dates back to a 1920s patent held by GMMCO in Chicago in the 1920s and has been copied by every other casket hardware handle manufacturer on the planet. This part is stamped in Chicago from US steel on the same equipment, and under the same family management, today as it was in the 1920s. This adapter is compatible with any size or style of swing arm we offer. This adapter is an American original.  SpecificationsHeight:Width:Material: SteelFinish: None (raw steel)

    2433 in stock

    $1.20

  • Brass Clips

    Brass Clips

    448 in stock

    Brass Clips for Securing Shield  This spring clip secures decorative Dixline plastic shields (aka lugs). Simply insert the clip on the bolt when securing bolt-thru style casket handle bracket arms to the casket side wall. Then snap the decorative shield in place. SPECIFICATIONS Part: PP7426 Width: 5/8 in. Height: 3/4 in. Depth: 3/8 in. Weight: 1 oz. Finish: natural, brass Origin: Illinois, USA

    448 in stock

    $0.49

  • Lug, Double, Crown Royale

    Lug, Double, Crown Royale

    Out of stock

    This decorative lug is compatible with two swing arms. Use this lug to make short handles (a.k.a. an EAR) with two arms, two tips, and a short bar stock. Alternatively, use three of these lugs with 6 arms, two tips, and a long bar stock for a long casket handle. Specifications Lug Length: 9 Inches Lug Height: 3 Inches Steel: 0.050 inches (1/20 inch) - 18 ga. Finish: Unfinished Part No: G147 Finishing These parts are ready for your unique and creative finishing coat. While we offer swing arm parts in a small variety of polished and antique finishes, there are countless methods to finish these steel parts to achieve the unique style you want. Learn more by reading our article on how to finish raw steel.  History We've partnered with General Machinery & Mfg. Co. of Chicago to revive these unique vintage parts--some of which have not been produced since the 1940s. Learn more about these vintage parts by reading about our suppliers. The first thing you will notice when you receive these parts is that the steel is higher quality and heavier gage than many similar brackets made by others.

    Out of stock

    $4.40

  • Lug, Single, Tall Art Deco, Adapter

    Lug, Single, Tall Art Deco, Adapter

    2198 in stock

    Decorative metal casket handle adapters were common on American caskets built in the 1920s through the 1950s. Consolidation, off-shore production, and cost-cutting measures from the 1960s to present day have resulted in the loss of many of these decorative metal corners. We ventured to northwest neighborhoods of Old Chicago just off West Fullerton Avenue--an historical area home to dozens of legacy machine shops, as well as furniture and clothing manufacturers. We found the original location where these parts were stamped from American steel on equipment that has been operating since the 1920s. This casket adapter is the real deal. An American original. True vintage not stamped since 1948. This adapter is compatible with any adapter style swing arm. Designed to fasten to the outside wall of the casket with two wood screws. SpecificationsHeight: 6 in.Width: 2-1/8 in.Material: SteelFinish: None (raw steel)

    2198 in stock

    $3.34

  • Steel Extension Casket Handle, EAR, Magic Lamp

    Steel Extension Casket Handle, EAR, Magic Lamp

    Out of stock

    This decorative casket handle is composed of a Magic Lamp lug with two swing arms, bar and tips. Also known as a steel extension handle or an EAR. Typically use 8 per casket with 3 on each long side and 1 on each short side. Specifications Width: 13-1/4 in. Height: 3-3/8 in.Steel: 0.050 inches (1/20 inch) - 18 ga.Finish: UnfinishedSterling Part No: E945Lug: G392Arms: Bar: Tips:  Finishing These parts are ready for your unique and creative finishing coat. While we offer swing arm parts in a small variety of polished and antique finishes, there are countless methods to finish these steel parts to achieve the unique style you want. Learn more by reading our article on how to finish raw steel.  History We've partnered with General Machinery & Mfg. Co. of Chicago to revive these unique vintage parts--some of which have not been produced since the 1940s. Learn more about these vintage parts by reading about our suppliers. This particular configuration was made from steel stamped in Chicago and then plated or painted by Sterling Casket Hardware in Virginia. The first thing you will notice when you receive these parts is that the steel is higher quality and heavier gage than many similar brackets made by others.

    Out of stock

    $23.94

  • Lug, Double, Oval, Adapter

    Lug, Double, Oval, Adapter

    Out of stock

    This oval lug is compatible with two swing arms. We've partnered with General Machinery & Mfg. Co. of Chicago to revive these unique vintage parts--some of which have not been produced since the 1940s. Learn more about these vintage parts by reading about our suppliers. The first thing you will notice when you receive these parts is that the steel is higher quality and heavier gage than many similar brackets made by others. Specifications Lug Length: 9-1/2 in.Lug Height: 5 in.Steel: 0.050 inches (1/20 inch) - 18 ga.Finish: Unfinished Finishing These parts are ready for your unique and creative finishing coat. While we offer swing arm parts in a small variety of polished and antique finishes, there are countless methods to finish these steel parts to achieve the unique style you want. Learn more by reading our article on how to finish raw steel. 

    Out of stock

    $4.40

Casket Hardware

Login

Forgot your password?

Don't have an account yet?
Create account