Same day shipping on orders received by 11:00am Central Time.

Casket Hardware

14 products


  • End Cap, 1-1/4 inch Oval End Cap, 1-1/4 inch Oval

    End Cap, 1-1/4 inch Oval

    11 reviews

    3413 in stock

    Add a finished look to your wooden handles. These end caps fit onto the ends of a 1 inch by 1-1/4 inch oval wooden handle. Order 8 tips to cover the ends of four handles on one casket. Antique finishes include; antique copper, antique bronze and venetian bronze. Polished finishes include; polished silver, polished gold and polished bronze. Matching swing bar handles also available. Specifications Size: 1-1/4 Inch, Oval Length: 2 Inches Long Material: Injection Molded Plastic Finishing process: PVD Vacuum Coating Finishing technique: Antiqued and Polished

    3413 in stock

    $4.88

  • End Cap, 1-1/2 inch Round End Cap, 1-1/2 inch Round

    End Cap, 1-1/2 inch Round

    2 reviews

    2196 in stock

    Add a finished look to your wooden handles. These end caps fit onto the ends of a 1-1/2 inch round wooden dowel handle. Order 8 tips to cover the ends of four handles on one casket. Antique finishes include; antique bronze, antique copper and venetian bronze. Polished finishes include; polished silver, polished gold and polished bronze. Matching swing bar handles also available. Specifications Size: 1-1/2 Inch, Round Length: 2-1/4 Inches long Material: Injection Molded Plastic Finishing process: PVD Vacuum Coating Finishing technique: Antiqued and Polished

    2196 in stock

    $5.15 - $5.19

  • Bolt-Thru Swing Bar Casket Handles, 1-1/2 inch Round Bolt-Thru Swing Bar Casket Handles, 1-1/2 inch Round

    Bolt-Thru Swing Bar Casket Handles, 1-1/2 inch Round

    5 reviews

    3340 in stock

    These are the industry standard when it comes to swing bar style casket handle hardware. For four generations, Dixline has been stamping and finishing this swing bar handle bracket for casket builders all over the world. This is the design that has been copied by dozens of foreign casket hardware manufacturers. If you want the original, look no further. Antiqued finishes include; antique bronze, antique copper and venetian bronze. Polished finishes include; polished silver, polished gold and polished bronze. Add matching end caps to complete your project. Swing bar arms are designed to wrap around a 1-1/2 inch round wooden casket dowel (not included). As recent as 2015, one could typically find this standard size dowel at a local home improvement store; this seems no longer to be the case.  Rockler, Woodcraft, Lowes all have limited selection online of 1-1/2 round, but only in lengths up to 36 and 48 inches. There is a wood shop in Maine that sells a 72" Ash dowel online. Order 12 swing bars for 4-pattern on each long side, or 16 swing bars for 6-pattern on each long side.  These hinged swing bar arms bolt through the sidewall of the casket. The bolt is secured with a # 10 flat washer and a #10 machine screw nut (not included, order separately). Specifications Material: Steel Finishing process: Electroplating Finishing technique: Antiqued and Polished 4-1/2 Inches Long 1-3/4 Inches Wide

    3340 in stock

    $5.39

  • Sale -$2.92Last stock! Casket Handles, Swing Bar, 5/8x1-1/4 Triple Groove Bar Arm, Oil Rubbed Bronze Casket Handles, Swing Bar, 5/8x1-1/4 Triple Groove Bar Arm, Oil Rubbed Bronze

    Casket Handles, Swing Bar, 5/8x1-1/4 Triple Groove Bar Arm, Oil Rubbed Bronze

    3 reviews

    6 in stock

    These hinged casket handle brackets screw to the outside sidewall of the casket. Order a set of 12 brackets for 4-pattern on each long side, or 16 brackets for 6-pattern on each long side. These brackets are designed to secure to an 5/8-inch by 1-1/4-inch bar style wooden casket handle. Notice, these brackets will not fit Casket Builder Supply oval wooden dowel handles. These parts are stamped from steel in Chicago, Illinois and powder coated in Beaver Dam, Wisconsin. Specifications Parts: G240 + G307 Arm Length: 4 in. Arm Width: 1-1/8 in. Arm Protrusion (at rest): 1-1/8 in. Handle Size: Bar 5/8x1-1/4 with 1/4 radius Steel (arms): 0.025 (1/40 inch) - 24 ga. Steel (adapters): 0.050 inches (1/20 inch) - 18 ga. Steel Source: Made in USA, Always Finish: Powder coat Color: Oil Rubbed Bronze

    6 in stock

    $4.71$1.79

  • Casket Handles, Swing Bar Arm with Adapter, Bar Style, Raw Steel Casket Handles, Swing Bar Arm with Adapter, Bar Style, Raw Steel

    Casket Handles, Swing Bar Arm with Adapter, Bar Style, Raw Steel

    1 reviews

    Out of stock

    This swing bar arm and adapter is the real vintage. We've partnered with General Machinery & Mfg. Co. of Chicago to revive these unique vintage parts--some of which have not been produced since the 1940s. Learn more about these vintage parts by reading about our suppliers. The first thing you will notice when you receive these parts is that the steel is higher quality and heavier gage than many similar brackets made by others. Specifications Arm Length: 3-3/4 in. Arm Width: 1-1/8 in. Arm Protrusion (at rest): 1-1/8 in. Handle Size: 5/8 x 1-1/4 in. with 1/4 in. radius Steel (arms): 0.025 (1/40 inch) - 24 ga. Steel (adapters): 0.050 inches (1/20 inch) - 18 ga. Steel Source: Made in USA, Always Finish: Unfinished Part No: G307 Finishing These parts are ready for your unique and creative finishing coat. While we offer swing arm parts in a small variety of polished and antique finishes, there are countless methods to finish these steel parts to achieve the unique style you want. Learn more by reading our article on how to finish raw steel. 

    Out of stock

    $2.66

  • Lug, The Last Supper Lug, The Last Supper

    Lug, The Last Supper

    103 in stock

    The Last Supper lug is a decorative lug compatible with bolt-through style swing bar casket handle brackets. This part is stamped in steel, electroplated and buffed in antique bronze finish in Galva, IL. Use 8 lugs with 16 bolt-through swing bar handles for one casket. Alternatively, use one decorative lug with two wooden lugs on each long side. Specifications Length: 11-1/2 in. Width: 4-1/2 in. Thickness: 7/8 in. Handle Spacing: 7-1/2 in. Material: Steel Finish: Antique Bronze

    103 in stock

    $20.50

  • Casket Handles, Art Deco Lug with Single Swing Bar Arm, Bar Handle Casket Handles, Art Deco Lug with Single Swing Bar Arm, Bar Handle

    Casket Handles, Art Deco Lug with Single Swing Bar Arm, Bar Handle

    Vintage Art Deco Lug This art deco lug with one swing arm is the real vintage. We've partnered with General Machinery & Mfg. Co. of Chicago to revive these unique vintage parts--some of which have not been produced since the 1940s. Learn more about these vintage parts by reading about our suppliers. The first thing you will notice when you receive these parts is that the steel is higher quality and heavier than many similar brackets made by others. Specifications Lug Height: 6 in. Lug Width: 2-1/2 in. Arm Length: 3-3/4 in. Arm Width: 1-1/8 in. Arm Protrusion (at rest): 1-1/2 in. Handle Size: 5/8 x 1-1/4 in. bar with 1/4 in. radius Steel (arms): 0.025 (1/40 inch) - 24 ga. Steel (adapters): 0.050 inches (1/20 inch) - 18 ga. Steel Source: Made in USA, Always Finish: Unfinished Finishing These parts are ready for your unique and creative finishing coat. While we offer swing arm parts in a small variety of polished and antique finishes, there are countless methods to finish these steel parts to achieve the unique style you want. Learn more by reading our article on how to finish raw steel.   

  • Swing Bar Casket Handles, 1 x 1-3/8 Oval, Arm Only Swing Bar Casket Handles, 1 x 1-3/8 Oval, Arm Only

    Swing Bar Casket Handles, 1 x 1-3/8 Oval, Arm Only

    1 reviews

    347 in stock

    This steel arm and adapter style casket handle is common on wood caskets. This type of arm hinges on a patented 3-hole pattern and can be connected to a simple single adapter or a pair of arms can be used with a lug. The arm is secured to the outside of a wood casket with single or double lug or bracket. The arm is wrapped around an oval dowel handle made from wood or steel. This arm is available in two sizes including a 1x1-1/4 oval and a 1x1-3/8 oval. Both are compatible with our wooden oval dowel handles, with the smaller of the two making for a a very tight fit with our oval wooden dowels. The 1x1-3/8 arm and adapter is a little easier to fit with our oval dowels. If you are making your own oval dowel handles with a 1-inch bullnose bit, then order the 1x1-1/4 size.  If you are fitting with our oval steel bar stock, use the 1x1-1/4 size. This swing bar is the real vintage. We've partnered with General Machinery & Mfg. Co. of Chicago to revive these unique vintage parts--some of which have not been produced since the 1940s. Learn more about these vintage parts by reading about our suppliers. The first thing you will notice when you receive these parts is that the steel is higher quality and heavier gage than many similar brackets made by others. This type of arm is an adapter design. The bracket is secured to the side of the casket with single or double lug or bracket. The arm hinges on a patented 3-hole pattern. This arm is compatible with our wooden oval dowel handles. Specifications Part: G265Arm Length: 4 in.Arm Width: 1-1/4 in.Arm Protrusion (at rest): 1-1/4 in.Handle Size: Oval 1x1-3/8Steel (arms): 0.025 (1/40 inch) - 24 ga.Steel Source: Made in USAFinish: Unfinished Finishing These parts are ready for your unique and creative finishing coat. While we offer swing arm parts in a small variety of polished and antique finishes, there are countless methods to finish these steel parts to achieve the unique style you want. Learn more by reading our article on how to finish raw steel. 

    347 in stock

    $1.95

  • Casket Handles, Swing Bar, End Cap, Tip, 5/8 X 1-1/4 Triple Grove Oval

    Casket Handles, Swing Bar, End Cap, Tip, 5/8 X 1-1/4 Triple Grove Oval

    180 in stock

    This decorative end cap for swing bar casket handles is the real vintage. This tip fits a 5/8 by 1-1/4 Triple Groove Oval bar style handle. Specifications Tip Height: 3/4 Inch Tip Length: 2 1/2 Inch Tip Width: 2 1/4 Inch Handle Size: 5/8 x 1-1/4 Inch oval Steel: 0.050 Inches (1/20 inch) - 18 ga. Steel Source: Made in USA, Always Finish: Unfinished Part No: G-264 Finishing These parts are ready for your unique and creative finishing coat. While we offer swing arm parts in a small variety of polished and antique finishes, there are countless methods to finish these steel parts to achieve the unique style you want. Learn more by reading our article on how to finish raw steel. History We've partnered with General Machinery & Mfg. Co. of Chicago to revive these unique vintage parts--some of which have not been produced since the 1950s. Learn more about these vintage parts by reading about our suppliers. The first thing you will notice when you receive these parts is that the steel is higher quality and heavier gage than many similar brackets made by others.

    180 in stock

    $4.00

  • Last stock!

    Casket Handles, Bar Stock Tubing, Triple Groove Oval, 5/8 x 1-1/4

    14 in stock

    This decorative steel bar stock fits a 5/8 by 1-1/4 oval bar style swing arm bracket. It is available in standard 72 inch lengths to accommodate either a single handle on the long side of a casket or a several short handles for the sides or end of a casket. Use short bars to construct 3 separate handles for a casket (a.k.a. an EAR).  Specifications Profile Size: 5/8 x 1-1/4 in. Oval Length: 72 in. Steel: 0.050 inches (1/20 inch) - 18 ga. Steel Source: Made in USA, Always Finish: Unfinished Part No: TM54 Finishing These parts are ready for your unique and creative finishing coat. While we offer swing arm parts in a small variety of polished and antique finishes, there are countless methods to finish these steel parts to achieve the unique style you want. Learn more by reading our article on how to finish raw steel. History We've partnered with General Machinery & Mfg. Co. of Chicago to revive these unique vintage parts--some of which have not been produced since the 1950s. Learn more about these vintage parts by reading about our suppliers. The first thing you will notice when you receive these parts is that the steel is higher quality and heavier gage than many similar brackets made by others.

    14 in stock

    $17.69

  • Swing Bar Casket Handles, 1 x 1-1/4 Oval, Arm Only Swing Bar Casket Handles, 1 x 1-1/4 Oval, Arm Only

    Swing Bar Casket Handles, 1 x 1-1/4 Oval, Arm Only

    1156 in stock

    This steel arm and adapter style casket handle is common on wood caskets. This type of arm hinges on a patented 3-hole pattern and can be connected to a simple single adapter or a pair of arms can be used with a lug. The arm is secured to the outside of a wood casket with single or double lug or bracket. The arm is wrapped around an oval dowel handle made from wood or steel. This arm is available in two sizes including a 1x1-1/4 oval and a 1x1-3/8 oval. Both are compatible with our wooden oval dowel handles, with the smaller of the two making for a a very tight fit with our oval wooden dowels. The 1x1-3/8 arm and adapter is a little easier to fit with our oval dowels. If you are making your own oval dowel handles with a 1-inch bullnose bit, then order the 1x1-1/4 size.  If you are fitting with our oval steel bar stock, use the 1x1-1/4 size. This swing bar is the real vintage. We've partnered with General Machinery & Mfg. Co. of Chicago to revive these unique vintage parts--some of which have not been produced since the 1940s. Learn more about these vintage parts by reading about our suppliers. The first thing you will notice when you receive these parts is that the steel is higher quality and heavier gage than many similar brackets made by others. This type of arm is an adapter design. The bracket is secured to the side of the casket with single or double lug or bracket. The arm hinges on a patented 3-hole pattern. Specifications Part: G270Arm Length: 4 in.Arm Width: 1-1/4 in.Arm Protrusion (at rest): 1-1/4 in.Handle Size: Oval 1x1-1/4Steel (arms): 0.025 (1/40 inch) - 24 ga.Steel Source: Made in USAFinish: Unfinished Finishing These parts are ready for your unique and creative finishing coat. While we offer swing arm parts in a small variety of polished and antique finishes, there are countless methods to finish these steel parts to achieve the unique style you want. Learn more by reading our article on how to finish raw steel. 

    1156 in stock

    $1.66

  • Swing Bar Casket Handles, 1-1/4 Round, Arm Only Swing Bar Casket Handles, 1-1/4 Round, Arm Only

    Swing Bar Casket Handles, 1-1/4 Round, Arm Only

    Out of stock

    This steel arm and adapter style casket handle is common on wood caskets. This type of arm hinges on a patented 3-hole pattern and can be connected to a simple single adapter or a pair of arms can be used with a lug. The arm is secured to the outside of a wood casket with single or double lug or bracket. The arm is wrapped around a round dowel handle made from wood or steel. This arm is a 1-1/4 round profile.  If you are purchasing or making your own dowel handles, you will want the outside precisely 1-1/4 diameter. This swing bar is the real vintage. We've partnered with General Machinery & Mfg. Co. of Chicago to revive these unique vintage parts--some of which have not been produced since the 1940s. Learn more about these vintage parts by reading about our suppliers. The first thing you will notice when you receive these parts is that the steel is higher quality and heavier gage than many similar brackets made by others. This type of arm is an adapter design. The bracket is secured to the side of the casket with single or double lug or bracket. The arm hinges on a patented 3-hole pattern. Specifications Part: G349Arm Length: 4 in.Arm Width: 1-1/4 in.Arm Protrusion (at rest): 1-1/4 in.Handle Size: Round 1-1/4Steel (arms): 0.025 (1/40 inch) - 24 ga.Steel Source: Made in USAFinish: Unfinished Finishing These parts are ready for your unique and creative finishing coat. While we offer swing arm parts in a small variety of polished and antique finishes, there are countless methods to finish these steel parts to achieve the unique style you want. Learn more by reading our article on how to finish raw steel. 

    Out of stock

    $2.19

Casket Hardware

Login

Forgot your password?

Don't have an account yet?
Create account