Same day shipping on orders received by 11:00am Central Time.

Swing Bar Handles

38 products


  • Lugs, Wood, Queen Anne Lugs, Wood, Queen Anne

    Lugs, Wood, Queen Anne

    1 reviews

    55 in stock

    Add Decorative Styling To Your Wood Casket. Lugs are a decorative cover for bolt-through style swingbar brackets and have also been referred to as a shields, escutcheons, EARs, or adapters. You know how long it takes to trace and cut out curved shapes with a band saw or jig saw, then sand out the saw marks and finally put a nice Ogee edge on with a router. These wooden casket lugs are CNC milled to perfection and will save you time. Typically use 8 lugs for one casket--that is three lugs per long side and one per end compatible with a 6x2 bolt-through swingbar bracket pattern. Available in two styles. Queen Anne is slightly narrower and more oval. The Monaco is a bit more bold.   Specifications Length: 13-1/4 in. Width: 4 in. (Queen Anne) Thickness: 3/4 in. Bracket Spacing: 7-1/2 in. on center Edge: Ogee Material: Pine  

    55 in stock

    $16.99

  • Swing Bar Casket Handle, Arm and Adapter, 1-1/4 Oval Swing Bar Casket Handle, Arm and Adapter, 1-1/4 Oval

    Swing Bar Casket Handle, Arm and Adapter, 1-1/4 Oval

    1 review

    Out of stock

    This steel arm and adapter style casket handle is common on wood caskets. This type of arm hinges on a patented 3-hole pattern and can be connected to a simple single adapter or a pair of arms can be used with a lug. The arm is secured to the outside of a wood casket with single or double lug or bracket. The arm is wrapped around an oval dowel handle made from wood or steel oval bar stock. Order a set of 16 for a 6x2 handle pattern, or 12 for a 4x2 handle pattern.This swing bar is the real vintage. We've partnered with General Machinery & Mfg. Co. of Chicago to revive these unique vintage parts--some of which have not been produced since the 1940s. Learn more about these vintage parts by reading about our suppliers.The first thing you will notice when you receive these parts is that the steel is higher quality and heavier gage than many similar brackets made by others. This arm is compatible with 1x1-1/4 oval steel tubing.  If you are planning to use our wooden dowel handles, use the 1x1-3/8 arm and adapter instead.Arm is available in plain steel and in a variety of powder coated finish colors. If you have a particular color request, let us know and we can quote you. Plain steel arm and adapter come separate ready for finishing. Powder coated arms come preassembled with the adapter. Specifications Part No: G240, G270Arm Length: 4 in.Arm Width: 1-1/4 in.Arm Protrusion (at rest): 1-1/4 in.Handle Size: Oval 1x1-1/4 with 1/2 radiusSteel (arms): 0.025 (1/40 inch) - 24 ga.Steel (adapters): 0.050 inches (1/20 inch) - 18 ga.Steel Source: Made in USA, AlwaysFinish: Unfinished Finishing These parts are ready for your unique and creative finishing coat. While we offer swing arm parts in a small variety of polished and antique finishes, there are countless methods to finish these steel parts to achieve the unique style you want. Learn more by reading our article on how to finish raw steel.  

    Out of stock

    $2.46 - $5.11

  • End Cap, Tip, 1x1-1/4 Oval End Cap, Tip, 1x1-1/4 Oval

    End Cap, Tip, 1x1-1/4 Oval

    1 review

    304 in stock

    The finishing touch for your Swing Bar Handles. *****THIS END CAP DOES NOT FIT OUR WOODEN DOWEL HANDLES***** This dowel end cap is for covering the open ends of wood dowel or steel tube swing bar style casket handles. The tip secures in place on the end of the handle with two screws or two rivets. This end cap for swing bar casket handles is the real vintage. We've partnered with General Machinery & Mfg. Co. of Chicago to revive these unique vintage parts--some of which have not been produced since the 1950s. Learn more about these vintage parts by reading about our suppliers. The first thing you will notice when you receive these parts is that the steel is higher quality and heavier gage than many similar brackets made by others. This tip is compatible with 1x1-1/4 oval steel tubing.  If you are planning to use our wooden dowel handles, use the 1x1-3/8 tip instead. Tip is available in plain steel and in a variety of powder coated finish colors. If you have a particular color request, let us know and we can quote you. Plain steel tip are ready for finishing. Specifications Tip Height: 2 in.Tip Length: 1-1/2 in.Tip Width: 1-5/8 in.Handle Size: 1x1-1/4 OvalSteel: 0.050 inches (1/20 inch) - 18 ga.Steel Source: Made in USA, AlwaysFinish: Unfinished or Powder Coated Finishing These parts are ready for your unique and creative finishing coat. While we offer swing arm parts in a small variety of polished and antique finishes, there are countless methods to finish these steel parts to achieve the unique style you want. Learn more by reading our article on how to finish raw steel.

    304 in stock

    $1.98 - $3.86

  • Lug, Swing Bar Bracket Cover Lug, Swing Bar Bracket Cover

    Lug, Swing Bar Bracket Cover

    109 in stock

    Swing Bar Bracket Cover (Lug) for Casket Handles This lug (also known as a shield) is designed to cover the mounting points on the outside of the casket where the bolt-through style swing bar arm connects to the casket. Each lug covers two swing bar arms. The lug can be installed with two wood screws. Typically, the lug snaps in place after the swing bar arms are installed with brass clips (2 clips are included with each lug). Typically use 3 lugs per long side and 1 lug on each end of the casket for a total of 8 lugs for one casket. This lug is compatible with bolt through swing bar handle brackets. Specifications Length: 11-1/2 in. Width: 3 in. Thickness: 3/4 in. Handle Spacing: 7-1/2 in. Material: Injection Molded Plastic; Brass Spring Clips Finishing Process: PVD Vacuum Coating Finishing Technique: Antiqued or Polished Color: Antique Bronze, Polished Gold or Polished Bronze Origin: Made in Illinois, USA

    109 in stock

    $9.95

  • Sale -$2.92Last stock! Casket Handles, Swing Bar, 5/8x1-1/4 Triple Groove Bar Arm, Oil Rubbed Bronze Casket Handles, Swing Bar, 5/8x1-1/4 Triple Groove Bar Arm, Oil Rubbed Bronze

    Casket Handles, Swing Bar, 5/8x1-1/4 Triple Groove Bar Arm, Oil Rubbed Bronze

    3 reviews

    6 in stock

    These hinged casket handle brackets screw to the outside sidewall of the casket. Order a set of 12 brackets for 4-pattern on each long side, or 16 brackets for 6-pattern on each long side. These brackets are designed to secure to an 5/8-inch by 1-1/4-inch bar style wooden casket handle. Notice, these brackets will not fit Casket Builder Supply oval wooden dowel handles. These parts are stamped from steel in Chicago, Illinois and powder coated in Beaver Dam, Wisconsin. Specifications Parts: G240 + G307 Arm Length: 4 in. Arm Width: 1-1/8 in. Arm Protrusion (at rest): 1-1/8 in. Handle Size: Bar 5/8x1-1/4 with 1/4 radius Steel (arms): 0.025 (1/40 inch) - 24 ga. Steel (adapters): 0.050 inches (1/20 inch) - 18 ga. Steel Source: Made in USA, Always Finish: Powder coat Color: Oil Rubbed Bronze

    6 in stock

    $4.71$1.79

  • Machine Screw Nut, #10-24 x 3/8 in. x 1/8 in., Coarse Thread, Hex

    Machine Screw Nut, #10-24 x 3/8 in. x 1/8 in., Coarse Thread, Hex

    32 in stock

    This nut is used in conjunction with a machine screw and washer to secure swing bar arms to the casket wall. Nuts are almost always used in conjunction with a mating bolt to fasten multiple parts together, kept together by a combination of their threads' friction, a slight stretching of the bolt, and compression of the parts to be held together. Available in the following quantities: 1 LB (Approximately 300 pieces) 5 LB (Approximately 1500 pieces) Specifications: Fastener Type:  Hex Machine Screw Nut Size Description:  #10-24 x 3/8 in. x 1/8 in. Diameter/Nominal Size:  #10 Thickness:  0.117-0.130 in. Wrench Size/Across Flats:  0.362-0.375 in. Width Across Corners:  0.413-0.433 in. Thread Pitch:  24 Thread Pitch Type:  Coarse Thread Direction:  Right Grade:  2 Material:  Low Carbon Steel Finish:  Plain Finish/No Plating Drive Type:  External Hex Used With:  Bolts/Screws up to Grade 5

    32 in stock

    $5.49 - $25.95

  • Casket Handles, Swing Bar Arm with Adapter, Bar Style, Raw Steel Casket Handles, Swing Bar Arm with Adapter, Bar Style, Raw Steel

    Casket Handles, Swing Bar Arm with Adapter, Bar Style, Raw Steel

    1 reviews

    Out of stock

    This swing bar arm and adapter is the real vintage. We've partnered with General Machinery & Mfg. Co. of Chicago to revive these unique vintage parts--some of which have not been produced since the 1940s. Learn more about these vintage parts by reading about our suppliers. The first thing you will notice when you receive these parts is that the steel is higher quality and heavier gage than many similar brackets made by others. Specifications Arm Length: 3-3/4 in. Arm Width: 1-1/8 in. Arm Protrusion (at rest): 1-1/8 in. Handle Size: 5/8 x 1-1/4 in. with 1/4 in. radius Steel (arms): 0.025 (1/40 inch) - 24 ga. Steel (adapters): 0.050 inches (1/20 inch) - 18 ga. Steel Source: Made in USA, Always Finish: Unfinished Part No: G307 Finishing These parts are ready for your unique and creative finishing coat. While we offer swing arm parts in a small variety of polished and antique finishes, there are countless methods to finish these steel parts to achieve the unique style you want. Learn more by reading our article on how to finish raw steel. 

    Out of stock

    $2.66

  • Adapter Style Swing Bar Casket Handle, 1-1/4 Inch Round Adapter Style Swing Bar Casket Handle, 1-1/4 Inch Round

    Adapter Style Swing Bar Casket Handle, 1-1/4 Inch Round

    1379 in stock

    The industry standard when it comes to swing bar style casket handles These are the industry standard when it comes to swing bar style casket handle hardware. For four generations, Dixline has been stamping and finishing this Swing bar arm for casket builders all over the world. This is the design that has been copied by dozens of foreign casket hardware manufacturers. If you want the original, look no further. Antique finishes include antique bronze, antique copper and venetian bronze. Polished finishes include polished bronze, polished silver and polished gold. Add matching end caps to complete your project. These swing bar arms are designed to secure to an 1-1/4-inch oval wooden or metal round stock casket handle (not included). An 1-1/4 round wood dowel or metal tube stock can be sourced at your local home improvement store. Order a set of 12 swing bars for 4-pattern on each long side, or 16 swing bars for 6-pattern on each long side. Installation & Fasteners (not included) These hinged swing bar arms attach to the sidewall of the casket. Each swing bar arm has three holes. We recommend using the center hole for positioning with one machine screw, washer & nut through the casket wall. This allows you to precisely measure and pre-drill those holes and position the handle neatly. The other two holes can receive two #8 x 5/8 inch pan head wood screws to secure the handles to the casket wall. Fasteners sold separately. Machine screws: #10 x 24 Washer: #10 Nut: #10 x 24 Wood screws: #8 x 5/8 Specifications Material: Steel Finishing process: Electroplating Finishing technique: Antiqued Bronze 4-1/2 inches tall 1-5/8 inches wide Handle assembly adds 1-5/8 inches to outside of casket on each side Origin: Illinois, USA

    1379 in stock

    $7.79

  • Lug, The Last Supper Lug, The Last Supper

    Lug, The Last Supper

    105 in stock

    The Last Supper lug is a decorative lug compatible with bolt-through style swing bar casket handle brackets. This part is stamped in steel, electroplated and buffed in antique bronze finish in Galva, IL. Use 8 lugs with 16 bolt-through swing bar handles for one casket. Alternatively, use one decorative lug with two wooden lugs on each long side. Specifications Length: 11-1/2 in. Width: 4-1/2 in. Thickness: 7/8 in. Handle Spacing: 7-1/2 in. Material: Steel Finish: Antique Bronze

    105 in stock

    $20.50

  • Steel Extension Casket Handle, EAR, Crown Royale

    Steel Extension Casket Handle, EAR, Crown Royale

    Out of stock

    This decorative casket handle is composed of a Crown Royale lug is with two swing arms, bar and tips. Also known as a steel extension handle or an EAR. Placement variations include:- One long bar set on each long side with a short bar set on each end- Three short bar sets on each long side and a short bar set on each end  Specifications Short Bar Width: 14-1/2 in. Long Bar Width: 64-1/2 in. Height: 5-1/2 inHeight: 5-1/2 in.Steel: 0.050 inches (1/20 inch) - 18 ga.Finish: UnfinishedSterling Part No: E703Lug: G147Arms: G307Bar: TM54Tips: G264 Finishing These parts are ready for your unique and creative finishing coat. While we offer swing arm parts in a small variety of polished and antique finishes, there are countless methods to finish these steel parts to achieve the unique style you want. Learn more by reading our article on how to finish raw steel.  History We've partnered with General Machinery & Mfg. Co. of Chicago to revive these unique vintage parts--some of which have not been produced since the 1940s. Learn more about these vintage parts by reading about our suppliers. This particular configuration was made from steel stamped in Chicago and then plated or painted by Sterling Casket Hardware in Virginia. The first thing you will notice when you receive these parts is that the steel is higher quality and heavier gage than many similar brackets made by others.

    Out of stock

    $22.97 - $62.46

  • Swing Bar Casket Handles, 1 x 1-3/8 Oval, Arm Only Swing Bar Casket Handles, 1 x 1-3/8 Oval, Arm Only

    Swing Bar Casket Handles, 1 x 1-3/8 Oval, Arm Only

    1 reviews

    256 in stock

    This steel arm and adapter style casket handle is common on wood caskets. This type of arm hinges on a patented 3-hole pattern and can be connected to a simple single adapter or a pair of arms can be used with a lug. The arm is secured to the outside of a wood casket with single or double lug or bracket. The arm is wrapped around an oval dowel handle made from wood or steel. This arm is available in two sizes including a 1x1-1/4 oval and a 1x1-3/8 oval. Both are compatible with our wooden oval dowel handles, with the smaller of the two making for a a very tight fit with our oval wooden dowels. The 1x1-3/8 arm and adapter is a little easier to fit with our oval dowels. If you are making your own oval dowel handles with a 1-inch bullnose bit, then order the 1x1-1/4 size.  If you are fitting with our oval steel bar stock, use the 1x1-1/4 size. This swing bar is the real vintage. We've partnered with General Machinery & Mfg. Co. of Chicago to revive these unique vintage parts--some of which have not been produced since the 1940s. Learn more about these vintage parts by reading about our suppliers. The first thing you will notice when you receive these parts is that the steel is higher quality and heavier gage than many similar brackets made by others. This type of arm is an adapter design. The bracket is secured to the side of the casket with single or double lug or bracket. The arm hinges on a patented 3-hole pattern. This arm is compatible with our wooden oval dowel handles. Specifications Part: G265Arm Length: 4 in.Arm Width: 1-1/4 in.Arm Protrusion (at rest): 1-1/4 in.Handle Size: Oval 1x1-3/8Steel (arms): 0.025 (1/40 inch) - 24 ga.Steel Source: Made in USAFinish: Unfinished Finishing These parts are ready for your unique and creative finishing coat. While we offer swing arm parts in a small variety of polished and antique finishes, there are countless methods to finish these steel parts to achieve the unique style you want. Learn more by reading our article on how to finish raw steel. 

    256 in stock

    $1.95

  • Casket Handles, Art Deco Lug with Single Swing Bar Arm, Bar Handle Casket Handles, Art Deco Lug with Single Swing Bar Arm, Bar Handle

    Casket Handles, Art Deco Lug with Single Swing Bar Arm, Bar Handle

    Vintage Art Deco Lug This art deco lug with one swing arm is the real vintage. We've partnered with General Machinery & Mfg. Co. of Chicago to revive these unique vintage parts--some of which have not been produced since the 1940s. Learn more about these vintage parts by reading about our suppliers. The first thing you will notice when you receive these parts is that the steel is higher quality and heavier than many similar brackets made by others. Specifications Lug Height: 6 in. Lug Width: 2-1/2 in. Arm Length: 3-3/4 in. Arm Width: 1-1/8 in. Arm Protrusion (at rest): 1-1/2 in. Handle Size: 5/8 x 1-1/4 in. bar with 1/4 in. radius Steel (arms): 0.025 (1/40 inch) - 24 ga. Steel (adapters): 0.050 inches (1/20 inch) - 18 ga. Steel Source: Made in USA, Always Finish: Unfinished Finishing These parts are ready for your unique and creative finishing coat. While we offer swing arm parts in a small variety of polished and antique finishes, there are countless methods to finish these steel parts to achieve the unique style you want. Learn more by reading our article on how to finish raw steel.   

    $6.43

Swing Bar Handles

Login

Forgot your password?

Don't have an account yet?
Create account